Netsuite Errors and Sync

This is where you can do a manual sync of your Zr Ware™ data to Netsuite. You also can see any errors that occur during the sync.

To start a manual sync:

1. Click the sync button in the top right hand corner.
2. The sync button should show a loading icon letting you know the sync is in progress.
   
3. Every minute or so, click the Refresh button to see if the sync is finished. If the sync is finished, the loading icon on the Blue Sync button will go away and it will show the word 'Sync' again.

To remove an error:

1. If you were unable to solve the sync error and you have made the necessary adjustments in Netsuite and Zr Ware to fix the issue. You have the option to delete the sync error from this page using the trash icon.

All Sync errors will show up on this page. These errors come directly from Netsuite and should give you some guidance on what caused the sync error. After fixing the sync issue, you can do a manual sync here as shown above to get that data into Netsuite.

See Common Netsuite Errors doc for help with errors.